DL328 by Dixon Valve | Double Bolt Clamp | Hose OD Range: from 3-4/64" to 3-24/64" | without Saddles | Plated Iron 2018 External Pipe to 37 Degree Flare Swivel Engine Oil Receivers Part Number

Engine Oil Receivers Part Number Description Male Thread Size Female Thread Size Cross Over Part Numbers Caterpillar® Wiggins FastFill R-ER Engine Oil Receiver 1

Part Number Buna-N Coupling Type Body Size Port Size Thread Type Dimensions A mm in 5100-4B Complete 1/4 1/8 1/8-27 Female NPT 81

Self-Restrained Type

69" FJ3114-0405S -05 7/16-20 1

Part Number Size OD ID Thickness Material 200GTTFBL 2" 4-1/2" 2-5/8" 1/8" Baylast™ 300GTTFCB 3" 5-5/8" 3-1/2" 1/8" Cork / Nitrile Rubber 300GTTFTK 3" 5-5/8" 3-1/2" 1/16" PTFE Envelope with Klinger Filler 300GTTFK 3" 5-5/8" 3-1/2" 1/8" Klingersil® C-4300 40321TF 3" 5-29/32" 3-1/2" 3/32" PTFE with Fiber Core 40364TF 3" 7-1/4" 5" 5/32" PTFE with Soft Fiber Core 40364BL 3" 7-1/4" 5" 1/8" Baylast™ 300GTTFBL 3" 5-5/8" 3-5/8" 1/8" Baylast™ 400GTTFCB 4" 6-5/8" 4-9/16" 1/8" Cork / Nitrile Rubber 400GTTFTK 4" 6-5/8" 4-9/16" 1/16" PTFE Envelope with Klinger Filler 400GTTFK 4" 6-5/8" 4-9/16" 1/8" Klingersil C-4401 40322TF 4" 6-7/8" 4-9/16" 3/32" PTFE with Fiber Core 40323TF 4" 8-3/8" 5-7/8" 5/32" PTFE with Soft Fiber Core 40323BL 4" 8-1/4" 5-7/8" 1/8" Baylast™ 400GTTFBL 4" 6-5/8" 4-5/8" 1/8" Baylast™

DL328 by Dixon Valve | Double Bolt Clamp | Hose OD Range: from 3-4/64" to 3-24/64" | without Saddles | Plated Iron 2018 External Pipe to 37 Degree Flare Swivel Engine Oil Receivers Part NumberFeatures: Inner surface has dual gripping ridges. Bolt lugs are reinforced to prevent bending out of alignment. Note: Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Measure hose O. D. accurately before ordering clamps. Consult Dixon when using double bolt clamps on helical wire hose. Plated Iron Part Number Hose O. D. Range Torque in ft. lbs. from to J48 1 8 64" 1 12 64" 15 J49 1